標題: [冷却CCD] 重新處理的 IC1805
rogerrao (阿炫)
註冊會員

積分 1835
帖子 1332
註冊 2009-9-9
用戶註冊天數 5314
用戶失蹤天數 3319
發表於 2010-10-7 12:21 
122.116.8.14
分享  私人訊息  頂部
舊版本星點虛虛的
重新處理過的有沒有好些? ^_^!

2000大圖請按這裡 http://farm5.static.flickr.com/4085/5059172784_7ab32e015c_o.jpg


無頭像
蔡逸龍
註冊會員

積分 439
帖子 378
註冊 2009-9-21
用戶註冊天數 5303
用戶失蹤天數 2892
發表於 2010-10-7 13:38 
172.27.1.109
差很大

舊版疊圖出了什麼問題嗎?


祐祐
註冊會員

積分 1216
帖子 1163
註冊 2009-9-2
用戶註冊天數 5321
用戶失蹤天數 3506
發表於 2010-10-7 13:43 
125.231.33.141
讚啦!!!
顏色更鮮豔更棒了


rogerrao (阿炫)
註冊會員

積分 1835
帖子 1332
註冊 2009-9-9
用戶註冊天數 5314
用戶失蹤天數 3319
發表於 2010-10-7 13:50 
122.116.8.14
其實並不是重新疊圖
是把上次處理完的tif檔拿來做星點雲氣分離
然後處理完雲氣的對比跟平順後~再把原圖用明度方式疊回去~就變這樣了~^_^

這是星點移掉後的雲氣


無頭像
wenjehpeng
註冊會員

積分 776
帖子 739
註冊 2009-9-2
用戶註冊天數 5321
用戶失蹤天數 3874
發表於 2010-10-7 14:18 
163.29.11.210
很猛
顏色很夢幻
星點紅暈是如何處裡掉?


rogerrao (阿炫)
註冊會員

積分 1835
帖子 1332
註冊 2009-9-9
用戶註冊天數 5314
用戶失蹤天數 3319
發表於 2010-10-7 14:49 
122.116.8.14


QUOTE:
原帖由 wenjehpeng 於 2010-10-7 14:18 發表
很猛
顏色很夢幻
星點紅暈是如何處裡掉?

用這裡介紹的方法
http://astroanarchy.blogspot.com/2009/04/neaic.html
Tone Mapping裡的星點移除步驟

•Open the ”Dust & Scratches” filter
•Set radius to 12
•Set Threshold to 50-120, by looking enlarged image, so that the center of the brighter stars disappears but image stays ”crispy”.
•Lower radius two points to 10 and set Threshold to 30-80. Follow image quality and details.
•Repeat several iterations with lower values, the more rounds the better.
•In the final step radius should be 1 and the Threshold between 3-10.
•If there are leftovers from brighter stars, use the clone tool to clean them up.

然後再把原圖當明度疊回去~色偏或光暈就沒了~


無頭像
arthur
註冊會員

積分 105
帖子 100
註冊 2010-7-31
用戶註冊天數 4990
用戶失蹤天數 3919
發表於 2010-10-7 15:28 
210.63.100.2
這顏色太太太太......太酷了

高階影像處理


mack (tak530s)
管理員

積分 542
帖子 449
註冊 2007-1-14
用戶註冊天數 6284
用戶失蹤天數 3202
發表於 2010-10-7 22:32 
114.40.12.95
不知道要說什麼了...


scottlee
註冊會員

積分 888
帖子 790
註冊 2009-9-16
用戶註冊天數 5307
用戶失蹤天數 3464
發表於 2010-10-7 23:40 
118.160.173.142
立刻試一下


rogerrao (阿炫)
註冊會員

積分 1835
帖子 1332
註冊 2009-9-9
用戶註冊天數 5314
用戶失蹤天數 3319
發表於 2010-10-8 00:22 
122.116.8.14
scottlee兄
我多手~~拿了您的M31圖試了一下
不知您覺得這樣有比較好嗎?
不過~這種處理法也是有個問題~星點的顏色都被處理掉了~@_@

原圖(jpg檔)


修改後


[ 本帖最後由 rogerrao 於 2010-10-8 00:23 編輯 ]


rogerrao (阿炫)
註冊會員

積分 1835
帖子 1332
註冊 2009-9-9
用戶註冊天數 5314
用戶失蹤天數 3319
發表於 2010-10-8 00:32 
122.116.8.14
還有一段重點沒有轉貼到
All Stars are now removed
•There are usually some other missing details as well.
•.Place the original H-a image with stars to top of the Starless one.
•Turn blending mode to ”Darken”
•Blink layers to see the effect
•Merge layers
•If some lighter shades are missing, fix them by using the History Brush
•After fixes, blink the image again with the original one, to be sure, that there is no missing details other than Stars!

經過星點移除後~有些細節會被抹掉
所以移除星點後~可以再把原圖拿來放在上層圖層做Darken合成
這樣可以補一些細節回來


scottlee
註冊會員

積分 888
帖子 790
註冊 2009-9-16
用戶註冊天數 5307
用戶失蹤天數 3464
發表於 2010-10-8 08:10 
210.243.38.253
果然色差就不見了,我昨晚也將以前拍的鵜鶘處理一下,真的有效
你處理的M31也很好,不過星點都沒有顏色了,沒錯
另原文中說:If there are leftovers from brighter stars, use the clone tool to clean them up
這是甚麼意思? leftover,clone?
英文不好,抱歉


rogerrao (阿炫)
註冊會員

積分 1835
帖子 1332
註冊 2009-9-9
用戶註冊天數 5314
用戶失蹤天數 3319
發表於 2010-10-8 09:57 
122.116.8.14
大意是說
用上面說的那個污點與刮痕的功能處理完之後
在大棵的亮星附近仍會留下一些處理不乾淨的外圍輪廓
這時候可以使用Clone工具(污點修復筆刷)去把亮星外圍留下的痕跡抹平清乾淨


無頭像
silentNight
註冊會員

積分 190
帖子 166
註冊 2010-5-26
用戶註冊天數 5056
用戶失蹤天數 3567
發表於 2010-10-8 11:30 
59.124.126.67
最好還是除完星點後用減法去弄一張星點圖再來編修那張星點圖
最後在加回去,沒發現這種方法會五顏六色的星點一起漂白耶


無頭像
silentNight
註冊會員

積分 190
帖子 166
註冊 2010-5-26
用戶註冊天數 5056
用戶失蹤天數 3567
發表於 2010-10-8 12:01 
59.124.126.67
熊大拍勢借個圖演示一下星點獨立編修成果


這方法可以保有星點顏色跟去除色差的紫邊
其實我自己基本處理法幾乎都是王維豪博士那幾招演變出來
加上有個喜歡弄立體圖的老外天文攝影師的技術混搞

[ 本帖最後由 silentNight 於 2010-10-8 12:09 編輯 ]